Accesories -Rack Mount
SI-9914 1U VME EQUIPMENT FRAME
The SI-9914 is a 1U VME Equipment Frame that mounts into a standard EIA 19-inch equipment rack. The SI-9914 is specifically designed to hold up to two single-slot VME products manufactured by DRS Technologies. Device options include:
- SI-8616 VHF/UHF Receiver
- SI-8616-1, -2, and -3 VHF/UHF Receivers
- SI-8622 VHF/UHF Receiver
- SI-9136A VHF/UHF Tuner (analog IF output only)
- SI-9136B VHF/UHF Tuner (analog IF output only)
- SI-9137A VHF/UHF Tuner
- SI-7001B and SI-7002B VHF/UHF Upconverters
The devices are easily plugged into slots on the rear of the equipment frame, allowing free access to device inputs and outputs.
The SI-9914 is powered by an internal power supply that automatically switches between 90-130 or 180–264 Vac at 50-60 Hz. The frame includes three fans to allow cooling in dense racking configurations. The front panel contains a POWER switch and a POWER ON indicator light. Plug-in devices can be controlled independent of the SI-9914 frame or via optional 10/100 base-T Ethernet or RS-232 interfaces located on the rear panel. An optional internal high-stability 10 MHz reference (9914/10MHz option) is available for installed VME devices. Other optional features include battery backup and audio output capabilities that specifically complement the SI-8616-X and SI-8622 receivers.
SI-9914 Highlights
- Standard 1U equipment frame 19 W x 1.75 H x 20.5 L inches
- Two VME slots available, VME64X
- Accepts up to two SI-8616, SI-8616-X, SI-8622, SI-9137A, SI-7002B or SI-9136A or SI-9136B subject to operating temperature considerations
- Optional control of VME devices
- Dual RS-232 control ports (one for each receiver)
- Single 10/100 base-T Ethernet control port for both receivers
- Dual 10/100 base-T Ethernet control ports (one for each receiver)
- Optional receiver support
- Battery for RAM backup
- Front panel audio
- Optional high-stability (0.01 ppm) 10 MHz reference module
DRS APR. Export of DRS SIGNAL SOLUTIONS, INC. products is subject to U.S. export controls. Licenses may be required. This material provides up-to-date general information on product performance and use. It is not contractual in nature, nor does it provide warranty of any kind. Information is subject to change at any time. Copyright © DRS SIGNAL SOLUTIONS, INC. 2003. All Rights Reserved.
Back to Top of Page
SI-9915 EQUIPMENT FRAME
The SI-9915 Equipment Frame is a compact, lightweight unit designed to provide a mechanical and electrical platform for up to four single-slot 6U VME devices, such as DRS Signal Solutions, Inc. SI-8616-X VHF/UHF Digital Receivers and the SI-8622 VHF/UHF Wideband Digital receiver. The frame is an open architecture chassis using commercial-off-the-shelf (COTS) equipment to support and interface with several DRS Technologies VME devices. It is particularly well suited for dense racking arrangements allowing four independent receivers to be mounted in 2U of vertical rack space. The SI-9915 frame is designed for mounting in a standard EIA 19-inch equipment rack. Independent control of each receiver is by means of the receiver front panel controller or an Ethernet interface.
The front panel contains a power switch, USB port, headset jack, memory purge switch, TFT-LCD display panel, keypad, tuning knob and two volume knobs. The frame includes a universal input ac power supply that provides power to the receivers, front panel and internal components. The frame includes cooling fans to allow operation in dense rack configurations. The frame is designed so that the VME receivers are easily plugged in from the rear. This allows easy user access to the receiver I/O connectors from the rear of the frame.
The SI-9915 uses a single-board computer running in an embedded Windows® XP environment for unit control. File storage is provided using a compact flash module. A dedicated RS-232 COM four-port module is used for computer-to-receiver communication. The unit’s internal power supply accepts 90 to 264 Vac, 47 to 63 Hz line power as its power source. The main chassis’ total power consumption is less than 55 watts empty and less than 142 watts with four SI-8616-X receivers installed and less than 164 watts with four SI-8622 receivers installed.
SI-9915 Highlights
- Standard 2U equipment frame 19W x 3.5H x 21.0L inches
- Four VME slots available
- Accepts up to four DRS SI-8616-X VME VHF/UHF digital receivers
- Easy receiver replacement
- Front panel receiver controller
- 10/100 Base-T Ethernet control of receivers
- 640 x 480 color TFT-LCD display
- VGA display output
- RF and IF pan displays
- Random access memory (RAM) battery backup
Public Release IAW 22 CFR (ITAR) 120.11(7). Export of DRS SIGNAL SOLUTIONS, INC. products is subject to U.S. export controls. Licenses may be required. This material provides up-to-date general information on product performance and use. It is not contractual in nature, nor does it provide warranty of any kind. Information is subject to change at any time. Copyright © DRS SIGNAL SOLUTIONS, INC. 2003. All Rights Reserved.
Back to Top of Page
SI-9916 2U VME EQUIPMENT FRAME
The SI-9916 is a 2U VME equipment frame that may be mounted in a standard EIA 19-inch equipment rack. The SI-9916 is specifically designed to hold up to four single - slot DRS 6U VME products.
Product options include:
SI-8622 Wideband VHF/UHF Receiver
SI-8616 (-X) VHF/UHF Receivers
SI-9136B VHF/UHF Tuner (with/without Digitizer)
SI-7002B VHF/UHF Upconverter
The open back of the SI-9916 provides access to the 6U devices for easy replacement. The 6U devices are powered through the VME backplane leaving all front panel connectors accessible to the user. The input and output connectors of each 6U device installed in the equipment frame are readily accessible at the rear of the unit. The 6U-device front panels effectively become the rear panel of the SI-9916. All the 6U devices are controlled using their remote interface RS-232 ports. The SI-8622 also includes Ethernet and USB control interfaces. All receiver control interfaces allow retrieval of IF spectral snapshot data blocks.
The SI-9916 front panel contains a power switch and power ON indicator. Integral fans provide sufficient airflow to ensure cooling in dense rack configurations. The ac power supply (90-130Vac, 50/60/400 Hz or 90-260 Vac,
50/60 Hz) provides power to all installed devices and other modules within the frame. If installed, an optional RAM battery backup feature allows compatible receivers to retain their current parameters and stored memory when powered down. The SI-8616-1, SI -8616-2, SI-8616-3 and SI-8622 all have compatible memory-retention circuitry.
SI--9916 Highlights
- 2U receiver equipment frame 19 W x 3.5 H x 20 L inches
- Four VME slots accept up to four DRS 6U VME products
- Easy device access and replacement
- Accepts Jonathan roller bearing rack slides
- Optional: RAM battery backup of receiver memory
Public Release IAW 22 CFR (ITAR) 120.11(7). Export of DRS SIGNAL SOLUTIONS, INC. products is subject to U.S. export controls. Licenses may be required. This material provides up-to-date general information on product performance and use. It is not contractual in nature, nor does it provide warranty of any kind. Information is subject to change at any time. Copyright © DRS SIGNAL SOLUTIONS, INC. 2003. All Rights Reserved.
Back to Top of Page
Accesories -Software
WJ-RCS32 RECEIVER CONTROL SOFTWARE
WJ-RCS32 is a collection of Windows® applications for real-time control and monitoring of various DRS Technologies products. The applications operate under Microsoft® Windows® 95, 2000, NT or XP. The receiver control application includes both IF and RF signal displays that incorporate point-and-click tuning operations. It supports simultaneous operator-directed and automatic search operations on multiple receivers. WJ-RCS32 offers built-in signal-analysis database tools for easy editing, cataloging and hand-off to selected receivers. It also includes signal logging with digital storage of receiver audio on the controlling computer. WJ-RCS32 provides on-line HELP, context-sensitive HELP and HELP file access.
WJ-RCS32 supports a variety of communication interfaces. An operator can connect receivers to a personal computer (PC) through a RS-232, a National Instruments GPIB (IEEE-488), National Instruments VXI, USB, VME or
Ethernet interface.
WJ-RCS32 consists of three stand-alone Windows® applications:
- Control Rx’s 32 — includes receiver control, signal list cataloging and audio recording
- Audio Playback 32 — allows analysis of captured audio information
- Signal List Editor 32 — offers the off-line creation of a signal list database.
-
WJ-RCS32 Highlights
- Controls up to 12 receivers and a search processor on RS-232, IEEE-488, VXI, USB, VME or Ethernet Interface
- Simple Graphical User Interface (GUI) for manual operations
- Comprehensive GUI for automatic-search operations
- Search with RF pan displays
- Signal-characteristics documentation through a selectable signal list
- Manual hand-off function signal list
- Auto hand-off function from a search processor or acquisition receiver to single or multiple hands-off receivers
- Signal monitor IF pan displays, using the WJ-9168 Signal Monitor, SI-863X Spectral Processor or SI-8616-2 and SI-8616-3 Receivers
- Audio recording and playback using multimedia computer
- On-line HELP, context-sensitive HELP and HELP file
Public Release IAW 22 CFR (ITAR) 120.11(7). Export of DRS SIGNAL SOLUTIONS, INC. products is subject to U.S. export controls. Licenses may be required. This material provides up-to-date general information on product performance and use. It is not contractual in nature, nor does it provide warranty of any kind. Information is subject to change at any time. Copyright © DRS SIGNAL SOLUTIONS, INC. 2003. All Rights Reserved.
Back to Top of Page
|
A Finmeccanica Company | Worldwide | Innovation | Integration | Stock Price
